|
Toothed Belt Cover, Upper Part, Remove and
Install
|
 Remove
Remove air cleaner housing with air intake cover – see
illustration "Air Ducts (X 16 SZR)" and illustration "Air Ducts (Z
16 SE)".
Remove fastening bolts (1) and remove upper part of toothed belt
cover from rear toothed belt cover.
|
|
Install
Attach upper part of toothed belt cover to rear toothed belt
cover – tightening torque 4 Nm / 3 lbf. ft.
Install air cleaner housing with air intake cover – see
illustration "Air Ducts (X 16 SZR)" and illustration "Air Ducts (Z
16 SE)".
|
