Replace company sign - L67
Remove
1. |
Warm company name with a heat gun and pull off backing
Note: Do not heat the
chrome coating to more than 90°C as there is a risk of damage.
Put the heat gun on its lowest setting and maintain a sufficient
distance.
|
2. |
Clean surface to be bonded
Note: Clean with
cleaner's naphtha or silicone remover.
|
Install
|
3. |
Position company sign in accordance with dimensional data and
stick on
Note: Attach company
symbol in the centre!
OPEL logo
|
Height above trim strip to lower edge of logo
|
I
|
20
|
Note: Dimensional data
in millimetres!
|
|
|