Replace protective trim strip for rear quarter
panel - L67
Remove
1. |
Detach outer rear quarter panel protective trim strip
• |
Carefully prise off protective trim strip with a plastic wedge
(1)
|
|
2. |
Remove remaining glue
• |
Remove adhesive residue at the exterior side panel with a foil
remover (2)
Note: Ensure that the
paint is not damaged.
|
|
|
|
Install
|
3. |
Dimensions L67
Front clearance
|
Rear clearance
|
Front clearance
|
Horizontal
|
Vertical
|
Vertical
|
I
|
II
|
III
|
5 mm
|
225 mm
|
200 mm
|
Note: The dimensions II
and III are measured starting from the bead in the side
sillboard.
|
|
4. |
Remove protective strips from protective trim strip
|
5. |
Attach outer rear quarter panel protective trim strip
• |
Align and glue on protective trim strip
|
|
|