Brake Drum, Remove and Install
Remove
1. |
Remove relevant rear wheel.
|
2. |
With worn brake drum, insert screwdriver through bore hole (1)
and push brake shoe back in order to bring cam over the parking
brake lever.
|
3. |
Detach brake drum
• |
Unscrew locking bolt (2)
|
|
|
|
Install
5. |
Check brake drum for cracks and the contact surface of the
brake shoes for grooves - if necessary: precision turn brake drum
or replace
brake drum.
Note: In general, both
brake drums must be machined or renewed. Only use approved
machining equipment. Observe manufacturer's instructions!
|
7. |
Attach brake drum to wheel hub with detent screw 4 Nm
|
|