Brake Drum, Precision Turn
Note: Only workshops
which have facilities for grinding over-dimensioned brake linings
to fit the machined brake drum using a brake lining grinding
machine are authorised to perform this operation.
Remove
3. |
Precision turn brake drums
Note: Always precision
turn both brake drums. Use only approved machines. Note
manufacturer's instructions!
|
4. |
Nominal values for the max. boring out dimension
|
Install
5. |
After boring out the brake drums, oversize brake shoes with a
5.6 mm thick lining must be installed
|
7. |
Adjust drum brake and parking brake
|
8. |
Fit rear wheels 110 Nm
|
|