Catalytic Converter Removal
Special Tools
EN-6129 Oxygen Sensor Remover / Installer
For equivalent regional tools refer to
Special Tools .
| 1. |
Remove the heated oxygen
sensor (1) from the heated oxygen sensor connector bracket.
|
| 2. |
Remove the heated oxygen
sensor (1) with the EN-6129 remover / installer
from the catalytic converter (2). |
| 3. |
Remove the exhaust pressure
sensor hose clamp (5). |
| 4. |
Remove the exhaust pressure
sensor hose (2) from the catalytic converter (4). |
| 5. |
Loosen the catalytic converter
clamp (3). |
| 6. |
Remove the 2 catalytic
converter bracket nuts (6). |
| 7. |
Remove the catalytic converter
(4) from the catalytic converter bracket (7) and the turbocharger
(1). |
| 8. |
Remove the catalytic converter
clamp (3). |
| 9. |
Remove the catalytic converter
gasket. |
|
