- Corsa B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- Repair Instructions
- Labour Time Allowances
- Diagnostic Information and Procedures
- Technical Service Bulletins
- Technical Information
- Battery
- Anti-Theft Warning System-M
- TID (Triple Info Display)
- Electrical Window Winders
- Instruments, Telltales
- Wiring Harnesses
- Fuse Box
- Radio Interference Suppression
- Switches, Control Unit, Relays, Ignition Lock
- Headlamps, Lamps and Horn
- Windscreen Wash/Wipe System, Heated Screen
- Central Door Locking System
- Repair Instructions
- Diagnostic Information and Procedures
- Other Information
- Switch
- Servo
- Control Unit with Crash Sensor
- Diagnostic Information and Procedures
- Miscellaneous
- Crash Sensor, Delay Switch
- Test Step 1 - Current Supply for Control Unit K37 and Servo Motors
- Test Step 2 - Voltage Supply for Crash Sensor in Control Unit K 37
- Test Step 3 - Ground Connection to Control Unit K 37
- Test Step 4 - Output for Servo Motors an Control Unit K 37
- Test Step 5 - Input and Output Leads to Control Unit K 37
- Test Step 6 - Input Signal "Lock" at Control Unit K 37
- Test Step 7 - Input Signal "Unlock" at Control Unit K 37
- 12-pin Wiring Harness Plug for CDLS Control Unit, Position: F 3 H
- Immobiliser
- R Accessories