- Corsa B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- Repair Instructions
- Labour Time Allowances
- Diagnostic Information and Procedures
- Technical Service Bulletins
- Technical Information
- Battery
- Anti-Theft Warning System-M
- TID (Triple Info Display)
- Electrical Window Winders
- Instruments, Telltales
- Wiring Harnesses
- Fuse Box
- Radio Interference Suppression
- Switches, Control Unit, Relays, Ignition Lock
- Headlamps, Lamps and Horn
- Windscreen Wash/Wipe System, Heated Screen
- Central Door Locking System
- Repair Instructions
- Diagnostic Information and Procedures
- Other Information
- Switch
- Servo
- Repair Instructions
- Diagnostic Information and Procedures
- Miscellaneous
- Overheating Cutout
- Servo Motors, Adjust
- Test Step 1 - Current Supply for Control Unit K37 and Servo Motors
- Test Step 4 - Output for Servo Motors an Control Unit K 37
- Test Step 8 - CDLS Servo Motor M 18, Wiring Harness X20-M18 (Driver's Door)
- Test Step 9 - CDLS Servo Motor M 32, Wiring Harn. X21-M32 (Co-driver's Door)
- Test Step 10 - CDLS Servo Motor M 19, Wiring Harness X18-M19 (Rear Left Door)
- Test Step 11 - CDLS Servo Motor M 20, Wiring Harness X19-M20(Rear Right Door)
- Test Step 12 - CDLS Servo Motor M 60, Wiring Harness X 16 - M 60 (Tailgate)
- Test Step 13 - Wiring Harness M 41, CDLS Servo Motor M 41 (Tank Flap)
- Test Step 15 - Switch in CDLS Servo Motor M 18 (Driver's Door)
- Test Step 16-Switch in CDLS Servo Motor M32 and CDLS Switch S42 (Co-driver Door)
- 6-pin Wiring Harness Plug to CDLS Servo Motor Driver's Door, Position: A 4 H
- 6-pin Wiring Harness Plug to CDLS Servo Motor Co-driver's Door, Position: F 4 H
- 6-pin Wiring Harness Plug to CDLS Servo Motors Rear Doors, Position: A5H, F4H
- 6-pin Wiring Harness Plug for CDLS Servo Motor Tailgate, Position: C7J
- Control Unit with Crash Sensor
- Immobiliser
- R Accessories