· With
ignition "ON", fault is recognized after a maximum of 30 s
· After
the engine is started, the fault is recognized after a maximum of 5 min.
The time depends on the calculation time of the microprocessor.
For example, at full load, it
can take up to 5 minutes if the test sum has low calculation priority.
· Replace
control unit
Effects:
· Solenoid
valves (brake band, 1 - 2 / 3 - 4 shifting, 2 -
3 shifting, torque converter clutch) and electrohydraulic pressure
regulator are switched off
· If
the fault is recognized, the following gears can still be shifted manually in
each driving stage (emergency program):
"Driving stage"
(gear) "D"(4), "3"(4), "2"(3), "1"(1)
|