- Vectra B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- Repair Instructions
- Description and Operation
- Component Locator
- Specifications
- Special Tools and Equipment
- Labour Time Allowances
- Technical Service Bulletins
- Technical Information
- Fittings, Hinges, Locks
- Glass, Window Guides, Window Winders
- Sliding Roof
- Trim Strips, Lettering, Coverings
- Seats, Upholstery, Inner Trim Panels
- Airbag
- Repair Instructions
- Steering Wheel, Remove and Install (Vehicles with Airbag up to MY '98) before MY 1998)
- Airbag Unit - Driver's Side, Remove and Install
- Airbag Unit - Passenger's Side, Remove and Install
- Side Airbag, Remove and Install V-belt tensioner, check, ribbed V-belt, remove and install cylinder head cover, remove and insta
- Contact Unit, Remove and Install (up to MY '98),
- Sensor - Side Airbag, Remove and Install
- Sensor Bracket - Side Airbag, Remove and Install
- Control Unit, Remove and Install
- Recommended Torque Values - Group C
- Remove and install contact unit (vehicles as of MY '98).
- Steering Wheel, Remove and Install (Vehicles with Airbag and 4-Spoke Steering Wheel as of MY '98)
- Description and Operation
- Specifications
- Special Tools and Equipment
- Diagnostic Information and Procedures
- Technical Service Bulletins
- Airbag SDM-0 (Delco)
- Airbag SAE4 (Siemens)
- Airbag SAB6 (Siemens)
- Airbag Arena/Movano (AC4)
- Airbag SDM-I2 (Delco)
- Airbag FRONTERA-B
- Airbag MRS (Temic)
- Airbag SAB8 (Siemens)
- Airbag SDM-E12 (Delphi)
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories