Fan Motor Thermoswitch, Remove and Install (X 20 DTH)
Remove, Disconnect
Disconnect wiring harness plug (1) from fan motor thermoswitch.
Release spring strip clamp (2) and slide coolant hose upwards slightly onto the connector (arrow) - cooling system remains closed.
Remove fan motor thermoswitch (3) - collect escaping coolant.
Install, Connect
Install fan motor thermoswitch in radiator.
Align coolant hose on connector and fasten.
Connect wiring harness plug to fan motor thermoswitch.
Top up cooling system - see operations "Cooling System, Top up and Bleed" and "Cooling System, Check for Leaks".
Remove, Disconnect 
Install, Connect 