Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-4034002.png)
NOTE:
-
The following illustrations depict replacement of lamp at right headlamp.
-
Replacement of bulb at left headlamp is performed analogously.
-
Disengage retaining bracket -3- from housing cover -1- and remove housing cover from retainers -arrows-.
NOTE:
-
The lamp -1- is clipped into the reflector - arrows A and B -.
-
When removing lamp -1-, the harness connector is not disconnected first.
-
Push the connector and thereby the lamp socket sideways in one direction, e.g. to - arrow B - until the lamp can be felt as being loose.
-
Pull lamp at harness connector out of reflector.
-
Guide the lamp with the harness connector connected out of the headlamp housing.
-
Disconnect harness connector -1- from lamp.
Installing
Install in reverse order of removal, noting the following:
