NSX V6-3.2L DOHC (2001)
NOTE:
-
Do not apply body primer to the rear window, and do not get body and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands.
-
Keep water, dust, and abrasive materials away from the primed surface.
6. With a sponge, apply a light coat of body primer to the original adhesive remaining around the rear window opening flange.
NOTE:
-
Do not apply body primer to the rear window, and do not get body and glass primer sponges mixed up.
-
Never touch the primed surfaces with your hands.
7. Thoroughly mix the adhesive and hardener together on a glass or metal plate with a putty knife.
NOTE:
-
Clean the plate with a sponge and alcohol before mixing.
-
Follow the instructions that came with the adhesive.
