RDX L4-2.3L Turbo (2008)
8. Disconnect the seat belt tensioner connector (A). Remove the upper retractor mounting bolt (B) and the lower retractor bolt (C), then remove the
front seat belt (D) and retractor (E).
9. If necessary, remove the front seat belt protector (F).
10. Remove the shoulder anchor adjuster (A).
11. Install the seat belt in the reverse order of removal, and note these items:
-
Apply medium strength type liquid thread lock to the anchor bolts before reinstallation.
-
Tighten the bolts by hand first, then tighten to the specified torque.
-
Check that the retractor locking mechanism functions as described.