RDX L4-2.3L Turbo (2008)
Wiper Arm: Adjustments
Wiper Arm/Nozzle Adjustment
FRONT
Wiper arms park position
1. When the wiper arms stop at the park position, confirm that they are at the standard position.
a: Position at about 1.2 in. (31 mm) from the top of cowl cover (A)
b: Position at about 1.4 in. (35 mm) from the top of cowl cover (A)
Washer nozzle position
2. When you turn on the washers, confirm 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard
positions, adjust the nozzles.
c: Position at about 15.2 in. (385 mm) from the top of the black ceramic area (B) at the lower windshield
d: Position at about 6.8 in. (173 mm) from the top of the black ceramic area (B) at the lower windshield
e: Position at about 7.0 in. (178 mm) from the top of the black ceramic area (B) at the lower windshield
f: Position at about 15.4 in.(392 mm) from the top of the black ceramic area (B) at the lower windshield
g: Position at about 4.8 in.(121 mm) from the windshield center line (C)
h: Position at about 4.7 in.(119 mm) from the windshield center line (C)
i: Position at about 19.6 in.(497 mm) from the windshield center line (C)
j: Position at about 19.7 in.(500 mm) from the windshield center line (C)
REAR
Wiper arm park position
1. When the wiper arm stops at the park position, confirm that it is at the standard position.
a: Position at about 0.2 in.(6 mm) from the black ceramic area (A)
Washer nozzle position
2. When you turn on the washers, confirm 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard
positions, adjust the nozzles.
b: Position at about 8.9 in.(226 mm) from the rear window center line (B)
