RDX AWD L4-2.3L Turbo (2010)
1. Detach the inner handle cable fastener (D) with a flat-tip screwdriver, then disconnect the inner handle cable from the cable fastener (E).
2. Disconnect the latch cable from the cable fastener (F).
NOTE: If the cable fasteners are damaged or stress-whitened, replace them with new ones.
Armrest assembly/grip assembly removal
9. Remove the power window switch See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and
Repair.
10. Remove the screws from back of the door panel (A), then remove the armrest assembly (B) and the grip assembly (C).