RDX AWD L4-2.3L Turbo (2010)
11. Install the door panel in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Replace any damaged cable fasteners with new ones.
-
The latch cable (A) should be fixed to the cable fastener (B) with the latch in lock position as shown.
-
Make sure the connector is plugged in properly, and the cables are connected securely.
-
Make sure the power window and the power door lock operates properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.
-
Push the clips and the hooks into place securely.