RDX AWD L4-2.3L Turbo (2010)
Rear Door Panel: Service and Repair
Rear Door Sash Inner Trim Replacement
Rear Door Sash Inner Trim Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the door or the related parts.
1. Remove the door panel See: Rear Door Panel Removal/Installation.
2. Lower the glass fully.
3. Detach the clip fastening the rear door sash inner trim (A) with the clip remover.
4. Pull back the door glass opening side of the trim to release the hooks (B) from the door glass opening flange of the door sash.
5. Install the trim in the reverse order of removal, and note these items:
-
If the clip is damaged or stress-whitened, replace it with a new one.
-
Push the clip and the hooks into place securely.
