RL V6-3.5L (2007)
Seat Belt: Service and Repair
Rear Seat Belt
Rear Seat Belt Replacement
NOTE: Check the rear seat belts for damage, and replace them if necessary.
Rear Seat Belt
1. Remove the rear seat cushion.
2. Remove the lower anchor bolt (A).
3. Remove the rear seat-back.
4. Remove the C-pillar trim from both sides.
5. Remove the rear shelf.
6. Remove the retractor mounting ET screw (A) and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D).
7. Install the seat belt in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the anchor bolts before reinstallation.
-
Check that the retractor locking mechanism functions as described.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
Center Seat Belt and Seat Belt Buckles
1. Remove the rear seat cushion.
