RL V6-3.5L (2007)
2. Remove the center anchor bolts (A), then remove the seat belt buckles (B) and center seat belt buckle (C).
3. Release the lock washer (A), then remove the anchor bolt (B), spring washer (C), center seat belt (retractor anchor) (D), or center seat belt buckle
(buckle anchor), and seat belt buckle (E).
NOTE: The retractor anchor is shown; the buckle anchor is similar.
4. Remove the rear seat-back.
5. Remove the C-pillar trim from both sides.
6. Remove the rear shelf.
7. Remove the retractor mounting ET screw (A) and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D).
