RL V6-3.7L (2009)
7. If necessary, remove the door glass inner weatherstrip (A) from the door by pulling it up.
8. Remove the cable fastener (A) from the inner handle (B), and then disconnect the lock cable (C) from the joint bushing (D). Disconnect the inner
handle cable (E) from the joint bushing (F), then remove the inner handle.
NOTE: If the joint bushings are damaged or stress-whitened, replace them with new ones.
9. Remove the screws (A, B), then remove the grip/armrest (C), and the wood trim (D) from the door panel (E).