RSX L4-2.0L (2005)
Trim Panel: Service and Repair
Trim Removal/Installation - Door Areas
Trim Removal/Installation - Door Areas
Special Tools Required
KTC trim tool set SOJATP2014
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown.
2. Install the trim in the reverse order of removal, and note these items:
-
Replace any damaged or stress-whitened clips.
-
When reinstalling the door opening trim, first align the rear upper corner portion of the trim on the rear upper corner of the door opening
flange.
-
Push the clips into place securely.
