TL FWD V6-3.5L (2009)
Air Bag: Removal and Replacement
Front Passenger's Airbag Replacement
Front Passenger's Airbag Replacement
NOTE: If replacing the front passenger's airbag after deployment, refer to Component Replacement/Inspection After Deployment See: Service and
Repair for a complete list of other parts that must also be replaced.
Removal
1. Do the battery terminal disconnection procedure, See: Starting and Charging/Battery/Service and Repair/Procedures then wait for 3minutes before
starting work.
2. Remove the glove box. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation
3. Disconnect the dashboard wire harness 4P connector (A) from front passenger's airbag.
4. Remove the screw, then remove the passenger's dashboard ducts (A, B).
5. Detach the clip (A), then remove the mounting nuts (B) and the mounting bolts (C) from the bracket (D).