ZDX V6-3.7L (2010)
3. Measure the resistance between terminals No. 1 and No. 2. There should be about 2 Ohms.
4. If the resistance is not as specified, replace the front center speaker.
Tweeter
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repairs or service.
1. Remove the A-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/Interior Trim
Removal/Installation - Pillar Areas.
2. Release the hooks, and remove the tweeter (A).
3. Check the capacitor (B) condition. If any malfunction is found, replace the tweeter.
4. Measure the resistance between the tweeter (A) terminal No. 2 and the outside terminal of the capacitor. There should be about 6 Ohms.