ZDX V6-3.7L (2010)
4. Remove these items:
-
Front seat belt lower anchor See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Belt Replacement
-
Front door opening seal, as needed See: Scuff Plate/Service and Repair
-
Rear door opening seal, as needed See: Scuff Plate/Service and Repair
5. Hit the upper clip (A) in the B-pillar upper trim (B) with a rubber mallet. Hitting the trim surface slides the projections (C) on the pin (D) and
pushes it into the grommet (E) on the body (F).
NOTE: The upper clip must be replaced with a new one when the B-pillar upper trim is reinstalled.