ZDX V6-3.7L (2010)
3. Install the trim and panel in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
Seat Flap Assembly
1. Remove the front floor lid and the tool box spacer.
2. Remove the screw, then pull up the seat flap assembly (A) by hand to detach the clips, and remove it.
3. Install the seat flap assembly in the reverse order of removal and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
Floor Lid Handle
1. Remove the floor lid.
2. Remove the screws, then remove the handle case (A) and the handle (B) from the floor lid.
