ZDX V6-3.7L (2010)
Fluid - Transfer Case: Service and Repair
Transfer Assembly Fluid Replacement
1. Warm up the engine to normal operating temperature (the radiator fan comes on).
2. Park the vehicle on level ground, and turn the engine off.
3. Raise the vehicle up on a lift, and make sure it is securely supported.
4. Remove the drain plug (A), and drain the transfer fluid (hypoid gear oil).
5. Reinstall the drain plug with a new sealing washer (B).
6. Remove the filler plug (A) and the sealing washer (B).
