ZDX V6-3.7L (2010)
12. Apply glass primer to the spacers (C) and the fasteners (D) mounting areas on the upper rear window (E), and let it dry. Attach the rubber dam A,
the rubber dams B, and the spacers with the adhesive tape to the inside face of the upper rear window as shown.
-
Be careful not to touch the upper rear window where the adhesive will be applied.
-
Be sure the rubber dam A, the rubber dams B, the spacers, and the fasteners line up with the alignment marks (F). If necessary, cut off the
excess rubber dams.
13. Attach the fasteners with the adhesive tape to the tailgate as shown.
