Functional Description

Functional Description

The clock, located in the display C16, is supplied by direct voltage (battery) through fuse F16 of fusebox G1 which is connected to pin 2 of connector A of the actual display.

N.B.: disconnecting the battery, the clock stops and must be reset using the 2 pushbuttons - hours and minutes - when the supply is re-connected.

Pin 4 receives the "key-operated" supply through fuse F15 of fusebox G1, while pin 1 is connected to earth; the key- operated supply lights up the numbers of the actual clock display (which stay off when the key is not engaged); lastly, a sidelights on signal reaches pin 3 which dims the light of the numbers.