Symbology

Symbology

A specific symbology has been used in this manual to permit a rapid identification of the main technical information supplied.

The list of symbols is given below.

• removal/disassembly [symbol]

• refitting/re-assembly [symbol]

• tighten to the torque [symbol]

• caulk nut [symbol]

• adjustment/regulation [symbol]

• visual check [symbol]

• lubricate [symbol]

• weight difference [symbol]

• angular value [symbol]

• pressure [symbol]

• temperature [symbol]

• brake system air purge [symbol]

• surfaces to be treated [symbol]

• interference [symbol]

• play [symbol]

• intake [symbol]

• exhaust [symbol]

• Lubricate only with engine oil [symbol]

• left-hand thread [symbol]

• torque for tightening in oil [symbol]

• engine r.p.m. [symbol]

• ovalization [symbol]

• taper [symbol]

• eccentricity [symbol]

• flatness [symbol]

• diameter [symbol]

• linear dimension [symbol]

• parallelism [symbol]

• service with grease [symbol]

• heating temperature [symbol]

• seal [symbol]

• service with engine oil [symbol]

• grease [symbol]

• CAUTION! [symbol]

• WARNING! [symbol]