Workshop Manuals Factory service & repair Alfa Romeo
01 Introduction and contents02 Technical data and maintenance03 Engine04 Clutch05 Gearbox06 Front axle and drive shafts07 Brakes08 Steering09 Suspension and wheels10 Heating and ventilation11 Bodywork12 Timing belt data sheets
Alfa Romeo 145/146 Factory Service Manual (1994-1999)02 · Technical data and maintenance
02 · Maintenance

General

Make
Alfa Romeo
Model
145/146 Factory Service Manual
Year
1994–1999
Section
Specific tools › General
Technical data and maintenanceGeneral

General

Special tools play an important part in the maintenance of cars, since it is essential to ensure accurate, realiable and quick service.

It should be noted that the times scheduled for the various operations have been calculated assuming the use of these tools.

This manual lists and illustrates the special tools made expressly by the Manufacturer of overhauling, maintenance and repair operations on the car.

The tool identification code is formed of a new number with 10 figures and an old number with 1 letter and 5 figures:

Ex: 1.820.088.000
(A.2.0461)

Tools made recently only have the new number.

The service network will be able to supply particular special tools, following the procedure already used c/o sigle Alfa Romeo Dealers.

Below we are listing the special tools used.

Group 00 - Boxer engines maintenance

1.822.103.000Ratchet wrench for removing/refitting spark plugs
1.822.107.000Box wrench for removing/refitting spark plugs
1.824.018.000 (C.2.0131)Tool for checking belt tension

Group 00 - 1929 Turbodiesel engine maintenance

1.820.095.000 (A.2.0468)Flywheel stopper (to be used in the car)
1.820.261.000Tappet cup retainer tool
1.820.262.000Lever for changing tappet plates
1.824.015.000 (C.2.0128)Tool for checking belt tension
1.824.016.000 (C.2.0129)Rod for tightening timing gear belts
1.824.017.000 (C.2.0130)End piece for tensioning timing gear belt
1.824.018.000 (C.2.0131)Tool for checking belt tension
1.860.931.000Tool for timing camshaft (from engine no. 1762798)
1.860.933.000Tool for positioning 1st cylinder at T.D.C. (from engine n° 1762798)

Group 00 - T. Spark 16V engines maintenance

1.825.013.000 (C.6.0183)Tool for checking T.D.C.
1.825.041.000Templates for timing camshafts (for 1970 - 1747 engines)
1.825.042.000Templates for timing camshafts (for 1370 - 1598 engines)

Group 10 - 8 Valve Boxer engines

1.820.012.000 (A.2.0195)Support for overhauling cylinder heads
1.820.016.000 (A.2.0226)Support fork for overhauling cylinder heads
1.820.059.000 (A.2.0378)Flywheel stopper
1.820.609.000 (R.4.0145)Engine supports for overhauling on stand
1.820.611.000 (R.4.0156)Tool for removing/refitting power unit

(Continued)

Parts & tools for this job For 1994 Alfa Romeo 145/146

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.