Group 10 - 1929 Turbodiesel engine
- Make
- Alfa Romeo
- Model
- 145/146 Factory Service Manual
- Year
- 1994–1999
- Section
- Specific tools › Group 10 - 1929 Turbodiesel engine
Technical data and maintenanceGroup 10 - 1929 Turbodiesel engine
(Continued)
| 1.821.176.000 (A.3.0641) | Puller tool for valve guide |
| 1.821.204.000 | Installing tool for front camshaft oil seals |
| 1.821.205.000 | Cage for disassembling/reassembling valves |
| 1.821.206.000 | Installing tool for valve guide oil seal |
| 1.821.207.000 | Installing tool for valve guide |
| 1.821.208.000 | Puller tool for valve guide oil seal |
| 1.822.101.000 | Extension wrench for slackening/screwing cylinder head fastening screws |
Group 10 - 1929 Turbodiesel engine
| 1.820.012.000 (A.2.0195) | Base for cylinder head support tool |
| 1.820.145.000 (R.4.0178) | Engine support brackets |
| 1.820.225.000 | Support for removing/refitting power unit |
| 1.820.228.000 | Flywheel stopper (to be used on the bench) |
| 1.820.229.000 | Flange for removing timing gear drive pulley |
| 1.820.233.000 | Bracket for removing/refitting power unit |
| 1.820.253.000 | Suppor base for dial gauge for measureing precombustion chamber protrusions/recesses |
| 1.820.257.000 | Support for disassembling/reassembling valves |
| 1.820.258.000 | Cylinder head support tool |
| 1.820.261.000 | Retainer tool for tappet cups |
| 1.820.262.000 | Levers for changing tappet plates |
| 1.820.267.000 | Tool for disassembling valves |
| 1.820.277.000 | Graduated disk for angle torque tightening |
| 1.820.283.000 | Support (camshaft side) for removing/refitting power unit |
| 1.820.284.000 | Support for disassembling/reassembling valves |
| 1.820.286.000 | Retainer tool for injection pump pulley for slackening or tightening fastening nut |
| 1.820.287.000 | Retainer tool for camshaft during disassembly or reassembly of side supports |
| 1.821.058.000 (A.3.0324) | Lever for disassembling/reassembling valves |
| 1.821.122.000 (A.3.0520) | Cage for disassembling/reassembling valves |
| 1.821.161.000 (A.3.0617) | Mallet for removing timing gear drive pulley |
| 1.821.169.000 (A.3.0633) | Puller tool for track rod pins |
| 1.821.171.000 (A.3.0635) | Oil seal tool support grip |
| 1.821.176.000 (A.3.0641) | Puller tool for valve guide |
| 1.821.177.000 (A.3.0642) | Installing tool for valve guide |
(Continued)
Parts & tools for this job For 1994 Alfa Romeo 145/146
- PARTEngine gasket setSearch: Alfa Romeo 145/146 1994 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.