Group 27 - Axle shafts
- Make
- Alfa Romeo
- Model
- 145/146 Factory Service Manual
- Year
- 1994–1999
- Section
- Specific tools › Group 27 - Axle shafts
‹ Prev Group 21 - Gearbox - Differential (1370 T. Spark 16V version with gearbox C.513.5 from chassis no. .............)Next › Group 44 - Front suspension (1929 Turbodiesel and T. Spark 16V versions)
Technical data and maintenanceGroup 27 - Axle shafts
(Continued)
| 1.821.034.000 (A.3.0287) | Puller tool for differential support roller bearing outer race - gearbox cover side |
| 1.821.037.000 (A.3.0293) | Installing tool for components on transmission shaft |
| 1.821.049.000 (A.3.0306) | Half plates for disassembling main and transmission shafts |
| 1.821.092.000 (A.3.0412) | Installing tool for components on main shaft |
| 1.821.117.000 (A.3.0495) | Puller tool for transmission shaft front bearing inner race |
| 1.837.432.100 | Installing tool for components on transmission shaft |
| 1.860.917.000 | Puller/installing tool for differential support bearings |
| 1.860.978.000 | Support for removing/refitting front suspension crossmember |
| 1.870.007.000 | Grip for installing/puller tools |
| 1.875.017.000 | Tool for disassembling differential bearings |
| 1.875.018.000 | Tool for assembling differential bearings |
Group 27 - Axle shafts
| 1.820.082.000 | Pliers for installing joint boot fastening clamps |
| 1.820.084.000 | Pliers for installing joint boot fastening clamps |
| 1.821.161.000 | Mallet |
| 1.821.165.000 | Puller tool for CV joint |
| 1.860.996.000 | Installing tool for bearing on axle shaft (Specific for 1370 T. SPARK 16V with gearbox C.513.5 from chassis no. ..............) |
| (*) | Half plates for removing axle shaft bearing (Specific for 1370 T. SPARK 16V with gearbox C.513.5 from chassis no. ..............) |
(*): Not available at time of going to press.
Group 33 - Brakes
| 1.820.610.000 | Tool for retaining rear drum brake cylinder piston |
| 1.821.034.000 | Tool for adjusting position of front brake caliper piston |
| 1.822.108.000 | Tool for moving back rear brake caliper piston |
Group 41 - Steering system
| 1.821.169.000 (A.3.0633) | Puller tool for steering side rod pin |
Group 44 - Front suspension (Boxer versions)
| 1.820.047.002 | Plate for removing bearing inner race from wheel hub |
| 1.820.089.000 | Tool for front suspension spring compression |
(Continued)
‹ Prev Group 21 - Gearbox - Differential (1370 T. Spark 16V version with gearbox C.513.5 from chassis no. .............)Next › Group 44 - Front suspension (1929 Turbodiesel and T. Spark 16V versions)
Parts & tools for this job For 1994 Alfa Romeo 145/146
- PARTWheel bearingSearch: Alfa Romeo 145/146 1994 wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Alfa Romeo 145/146 1994 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.