Rear panel - r r

Operation 7040H50 · Roof panel lining

3-door

Removing

- 7040L40 front compartment scuff strip - r r

- 7050A22 rear seat cushion - r+r

1. Prise up the bolt covers.

2. Unscrew the bolts

3. Move the seat belt retaining bracket.

1. Remove the perimetral seal on the door near the rear side piece area.

2. Remove the ashtray.

3. Unscrew the bolt.

4. Remove the bolt cover.

5. Undo the bolt securing the end of the rear seat belt.

6. Lower the squab and undo the bolts.

7. Disengage the rear side piece (7a) from the inner retainers (7b) using the special tool.

8. Disconnect the electrical connections.

9. Recover the rear side piece.

Refitting

Check that the rear side piece is not damaged.

Connect the electrical connection

Engage the rear side piece on the inner retainers.

Tighten the bolts and raise the squab.

Positioni the end of the rear seat belt and tighten the bolt.

Fit the bolt cover.

Tighten the bolt.

Fit the ashtray.

Fit the perimetral seal on the door frame near the rear side piece.

Position the seat belt mounting bracket and secure it with the bolts.

Fit the bolt covers.

- 7050A22 rear seat cushion - r+r

- 7040L40 front compartment scuff strip - r r

5-door

Removing

- 7040L44 rear compartment scuff strip - r r

- 7050A45 STRIKER FOR ATTACHMENT/RELEASE DEVICE for .one( SPLIT rear), seat BACKREST left or right - R.R.

1. Remove the bolt cover.

2. Undo the bolt securing the end of the rear seat belt.

3. Unscrew the bolt.

4. Release the door housing seal in the area of the rear panel.

1. Lower the rear seat backrest.

2. Undo the trim fixing bolt.

3. Remove the rear panel (3a) releasing the retainer (3b) from the edeg (3c) of the pillar trim.

Refitting

Check that the rear side piece is not damaged.

Position the rear panel engaging the retainer under the edge of the pillar trim.

Tighten the bolt fixing the trim.

Lift up the rear seat backrest.

Fit the door housing seal, in the area of the rear panel.

Tighten the bolt.

Positioni the end of the rear seat belt and tighten the bolt.

Fit the bolt cover.

- 7050A45 STRIKER FOR ATTACHMENT/RELEASE DEVICE for .one( SPLIT rear), seat BACKREST left or right - R.R.

- 7040L44 rear compartment scuff strip - r r