Clutch - r + r with gearbox removed

Operation 1810A24 · Clutch mechanism

1.6 TS, 2.0 TS

Removing

1. Fit the flywheel lock.

2. Undo the bolts (2a) and remove the clutch drip tray (2b) and the clutch disc (2c).

Refitting

1. Place the clutch disc (1a) and the clutch cage (1b) back in its housing using the centring tool (1c).

2. Tighten the bolts fixing the clutch drip tray to the recommended torque.

3. Remove the flywheel lock.

3.2 V6

Removing

1. Fit the flywheel lock.

2. Undo the bolts (2a) and remove the clutch cover (2b) complete with thrust bearing (2c).

3. Remove the clutch disc.

1. At the bench, remove the clutch release bearing (1a) from the clutch cover using the tool (1b).

Refitting

1. Place the clutch disc (1a) and the clutch cage (1b) back in its housing using the centring tool (1c).

2. Tighten the bolts fixing the clutch drip tray to the recommended torque.

3. Remove the flywheel lock.

The thrust bearing is fitted together with the manual gearbox and differential - 2110A10 manual gearbox and differential - r + r.

1.9 JTD 8V

Removing

1. Fit the flywheel lock.

2. Undo the bolts (2a) and remove the clutch drip tray (2b) and the clutch disc (2c).

Refitting

1. Place the clutch disc (1a) and the clutch cage (1b) back in its housing using the centring tool (1c).

2. Tighten the bolts fixing the clutch drip tray to the recommended torque.

3. Remove the flywheel lock.

1.9 JTD 16V

Removing

1. Fit the flywheel lock.

2. Undo the bolts (2a) and remove the clutch cover (2b) complete with thrust bearing (2c).

3. Remove the clutch disc.

1. At the bench, remove the clutch release bearing (1a) from the clutch cover using the tool (1b).

Refitting

1. Place the clutch disc (1a) and the clutch cage (1b) back in its housing using the centring tool (1c).

2. Tighten the bolts fixing the clutch drip tray to the recommended torque.

3. Remove the flywheel lock.

The thrust bearing is fitted together with the manual gearbox and differential - 2110A10 manual gearbox and differential - r + r.