Alarm led not working
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Alarm › Alarm led not working
Fault diagnosisAlarm led not working
ALARM LED NOT WORKING
When the alarm is operated, the LED does not come on
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner) and check whether there are any faults in the system | Continue to Step 2 | |||
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Using the diagnostic equipment, carry out the active diagnosis of the LED | Continue to Step 4 | LED does not come on | Continue to Step 3 | |
| 3 | WIRING CHECK | All OK | Problems met | Operation |
Check the continuity and insulation of the wiring between the Body Computer and the panel Check that the supply reaches the LED from the Body Computer See E7015 ALARM | Continue to Step 4 | The supply does not leave the Body Computer for the LED | Replace the Body Computer Op. 5505A32 | |
| The supply is sent correctly from the Body Computer but the LED does not come on | Replace the LED in the panel Op. 5505A24 | |||
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 147
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.