Transmission panel led not lit
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Gear shift › Transmission panel led not lit
‹ Prev Transmission warning light permanently onNext › Data not indicated on panel lcd and transmission lever panel led lit
Fault diagnosisTransmission panel led not lit
TRANSMISSION PANEL LED NOT LIT
When the ignition is switched on, the symbols on the gearbox panel do not light up.
| Results of the tests | ||||
| 1 | CHECK ON LIGHTING | All OK | Problems met | Operation |
|---|---|---|---|---|
Verify:
| Continue to Step 2 | Faulty LEDs | Replace LEDs | |
| 2 | CHECK ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
Verify:
(see: See E7051 ROBOTIZED GEARBOX) | Continue to Step 3 | Incorrect supply | Restore correct supply: See E7051 ROBOTIZED GEARBOX | |
| Connections not correct | Restore correct connections: See E7051 ROBOTIZED GEARBOX | |||
| Fuse blown | Replace fuse (and search for the cause of its blowing) | |||
| Faulty earth | Restore the earth contact: See E7051 ROBOTIZED GEARBOX | |||
| 3 | CHECK GEARBOX PANEL | All OK | Problems met | Operation |
| Check condition of gearbox panel | Continue to Step 4 | Gearbox panel faulty | Replace gearbox panel Op. 2127A12 | |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
‹ Prev Transmission warning light permanently onNext › Data not indicated on panel lcd and transmission lever panel led lit
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 147
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.