Steering control shaft SUPPORT - R.R.

Operation 4110A30 · Steering control

Removing

Proceed with removal - 5580C18 air bag module - r+r.

Closely observe the safety regulations established for this operation.

Proceed with removal - 4110A11 steering wheel - r+r for replacement or check for versions with air bag.

2.0 TS · Selespeed gearbox

Proceed with removal - 4110A16 steering wheel - r r for replacement or checks for versions with airbag and manual gearbox with hydraulic selection.

Proceed with removal - 7040A37 fuse box cover - r r.

Proceed with removal - 7040A26 steering column trim - r+r.

Proceed with removal - 5550A12 complete stalk unit - r+r for versions with air bag.

1. Undo the bolt (1a) and disconnect the steering column (1b) from the power assisted steering box pinion.

The bolt is pretreated and cannot therefore be refitted.

1. Disconnect the electrical connection from the steering angle sensor (only for versions with VDC up to 08/2001).

2. Undo the bolts (2a) and remove the support with the steering control shafts (2b).

All versions

Refitting

Place the support with the steering control shafts back in its housing and secure it using the bolts.

Connect the electrical connection to the steering angle sensor (only for versions with VDC up to 08/2001).

1. Connect the steering column (1a) to the steering box pinion and tighten the new bolt (1b) to the specified torque.

Proceed with refitting - 5550A12 complete stalk unit - r+r for versions with air bag.

Proceed with refitting - 7040A26 steering column trim - r+r.

Proceed with refitting - 7040A37 fuse box cover - r r.

2.0 TS · Selespeed gearbox

Proceed with refitting - 4110A16 steering wheel - r r for replacement or checks for versions with airbag and manual gearbox with hydraulic selection.

Proceed with refitting - 4110A11 steering wheel - r+r for replacement or check for versions with air bag.

Proceed with refitting - 5580C18 air bag module - r+r.