1088 engine cooling
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- 10 engine › 1088 engine cooling
Tightening torques1088 engine cooling
1088 ENGINE COOLING
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| COOLANT PUMP PULLEY | Bolt | M6 | (Water pump side) 0.7 ÷ 0.9 | 3.2 V6 |
| COOLANT PUMP RIGID INLET PIPE | Bolt | M6 | (Cylinder head side) 0.8 ÷ 1.0 | 1.6 TS |
| COOLANT PUMP RIGID INLET PIPE | Bolt | M6 | (Cylinder head side) 0.8 ÷ 1.1 | 2.0 TS |
| COOLANT PUMP RIGID INLET PIPE | Bolt | M6 | (Cylinder head) 0.8 ÷ 1.0 | 1.9 JTD 8V |
| COOLANT PUMP RIGID INLET PIPE | Bolt | M6 | (Cylinder head) 0.9 | 1.9 JTD 8V |
| COOLANT PUMP | Bolt | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.6 TS 2.0 TS |
| COOLANT PUMP | Bolt | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.9 JTD 16V |
| COOLANT PUMP | Bolt | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.9 JTD 16V |
| COOLANT PUMP | Bolt | M8 | (Cylinder head side) 2.3 ÷ 3.3 | 1.9 JTD 16V |
| COOLANT PUMP | Bolt | M6 | (Engine crankcase side) 0.8 ÷ 1.0 | 3.2 V6 |
| COOLANT PUMP | Bolt | M8 | (Cylinder head side) 2.1 ÷ 2.6 | 1.9 JTD 8V |
| COOLANT PUMP | Bolt | M8 | 2.1 - 2.6 | 1.9 JTD 8V |
| PIPE FROM PUMP/ACTUATOR UNIT | Connector | M12 | (Hydraulic actuator unit side) 1.4 ÷ 1.8 | 1.9 JTD 16V |
| THERMOSTAT | Bolt | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.6 TS 2.0 TS |
| THERMOSTAT | Bolt | M6 | (Cylinder head side) 0.8 ÷ 1.0 | 3.2 V6 |
| THERMOSTAT | Bolt | M8 | (Cylinder head side) 2.1 ÷ 2.6 | 1.9 JTD 8V |
| THERMOSTAT | Bolt | M8 | 2.1 ÷ 2.6 | 1.9 JTD 8V |
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.