R03 Passenger air bag disabled warning light

Fault diagnosisR03 Passenger air bag disabled warning light

On starting, the 'Passenger Air Bag Disabled' warning light comes on and remains on for longer than 4 seconds (control unit initial test)

Step	Test procedure	Result	Action
1	PASSENGER AIR BAG DISABLING SWITCH CHECK Verify: passenger Air Bag disabling switch correctly positioned; correct operation of the passenger Air Bag disabling switch : Wiring diagram E7030 AIRBAG	OK	Move onto step 2
		Switch not correctly positioned	Position the switch correctly End of diagnosis
		Passenger Air Bag disabling switch defective	Replace the passenger Air Bag disabling switch Op. 5580C26 End of diagnosis
2	CHECK WITH DIAGNOSTIC EQUIPMENT Connect the Examiner to the diagnostic socket. Check that there are no faults	OK	Move onto step 3
2		Errors present	Continue, following the instructions which come with the equipment End of diagnosis
3	ELECTRICAL EQUIPMENT CHECK Verify: connections between Air Bag control unit and instrument panel connections between Air Bag control unit and passenger Air Bag disabling switch correct supplies for Air Bag control unit and instrument panel Wiring diagram E7030 AIRBAG	OK	Move onto step 4
		Wiring faulty	Renew the wiring End of diagnosis
		Incorrect supplies	Restore the correct supplies : Wiring diagram E7030 AIRBAG End of diagnosis
4	CORRECT OPERATION CHECK Check that the fault is no longer present	OK	Incorrect selection of diagnostic procedure
4		Warning light bulb does not go out at all	Replace the Air Bag control unit Op. 5580C14 Incorrect selection of diagnostic procedure

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.