C32 Transmission warning light permanently on

Fault diagnosisC32 Transmission warning light permanently on

When the ignition is turned on, the robotized gearbox fault warning light symbol stays on.

Step	Test procedure	Result	Action
1	CHECK WITH DIAGNOSTIC EQUIPMENT Connect the Examiner equipment to the diagnostic socket. Verify: that there are no faults in the robotized gearbox control unit.	OK	Move onto step 2
1		Errors present in the control unit	Proceed in accordance with the information provided by the instrument End of diagnosis
2	CHECK WITH DIAGNOSTIC EQUIPMENT Connect the Examiner equipment to the diagnostic socket. Verify: that there are no faults in the robotized gearbox control unit.	OK	Move onto step 3
2		Errors present in instrument panel	Proceed in accordance with the information provided by the instrument End of diagnosis
3	CHECK WITH DIAGNOSTIC EQUIPMENT Connect the Examiner equipment to the diagnostic socket. Check in active diagnosis that the matrix display is working	OK	Move onto step 4
3		Faulty display/instrument panel	Replace instrument panel Op. 5560B11 End of diagnosis
4	CHECK ON CORRECT OPERATION Check that the fault is no longer present	OK	Move onto step 5
4		Probable fault in Selespeed control unit	Replace Selespeed control unit Op. 2127E10 End of diagnosis
5	CHECK ON CORRECT OPERATION Check that the fault is no longer present	OK	Incorrect selection of diagnostic procedure
5		Fault persists	Incorrect selection of diagnostic procedure

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.