O01 Front seat running not working
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2002
- Section
- Seats › O01 Front seat running not working
O01 Front seat running not working
When the lever is operated, the seat does not slide forwards or backwards along the guides
NOTA: Test seat slide while seated on the seat
| Step | Test procedure | Result | Action |
|---|---|---|---|
| 0 | PRELIMINARY CHECKS Firstly check that there are no obstacles or dirt along the guide | OK | |
| Presence of foreign bodies along seat travel |
End of diagnosis | ||
| 1 | CHECKING TRAVEL LUBRICATION Check the guides are properly lubricated | OK | |
| Lack of lubrication and increased friction |
End of diagnosis | ||
| 2 | CHECK SEAT RUNNER ATTACHMENTS Remove the seat Op. 7045A10 . Check that the seat runners are attached correctly to the car floor | OK | |
| Slide fastening loose |
End of diagnosis | ||
| 3 | CHECKING GUIDES AND SEAT SLIDE RELEASE Check the condition of the seat sliding guides and make sure there is no rust or distortions. Check the release lever for seat longitudinal adjustment. In particular, check the condition and that it is correctly fixed | OK | |
| Faulty guide attachment |
End of diagnosis | ||
| Faulty guides |
End of diagnosis | ||
| Release lever faulty |
End of diagnosis | ||
| 4 | CORRECT OPERATION CHECK Check that the fault is no longer present | OK | Incorrect selection of diagnostic procedure |
| Fault persists | Incorrect selection of diagnostic procedure |
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 147
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.