Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Maintenance03 Diagnosis – checks04 Engine (1.6 and 2.0 Twin Spark)05 Clutch06 Gearbox (manual and Selespeed)07 Front axle08 Brakes, ABS and traction control09 Steering10 Suspension and wheels11 Heating, air conditioning and washers12 Electrical equipment13 Body14 Body panels and reinforcement15 Wiring diagrams16 Connectors and pin-outs17 Wiring harnesses18 Fault diagnosis19 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2002)18 · Fault diagnosis
18 · Diagnostics

O33 Belt rewinding failure

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2002
Section
Seats › O33 Belt rewinding failure
Fault diagnosisO33 Belt rewinding failure

O33 Belt rewinding failure

The seat belt does not rewind correctly and/or completely after the buckle is undone

StepTest procedureResultAction
0PRELIMINARY CHECKS

Visually check that the belt does not show signs of kinks, loose threads and/or damage which prevent it from rewinding correctly

OK

Move onto step 1

There are kinks in the front belt
  • Remove the kinks, if necessary replace belt Op. 7065A12

End of diagnosis

There are kinks in the rear belt
  • Remove the kinks, if necessary replace belt Op. 7065B10

End of diagnosis

Front belt damaged

End of diagnosis

Rear belt damaged

End of diagnosis

1CORRECT FITTING CHECK

Check that the system is correctly fitted

OK

Move onto step 2

Fitting not correct

End of diagnosis

2CHECK ON CORRECT OPERATION

Check that the fault is no longer present

OK

Incorrect selection of diagnostic procedure

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.