Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Maintenance03 Diagnosis – checks04 Engine (1.6 and 2.0 Twin Spark)05 Clutch06 Gearbox (manual and Selespeed)07 Front axle08 Brakes, ABS and traction control09 Steering10 Suspension and wheels11 Heating, air conditioning and washers12 Electrical equipment13 Body14 Body panels and reinforcement15 Wiring diagrams16 Connectors and pin-outs17 Wiring harnesses18 Fault diagnosis19 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2002)18 · Fault diagnosis
18 · Diagnostics

M01 Front window winder not working

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2002
Section
Window winders › M01 Front window winder not working
Fault diagnosisM01 Front window winder not working

M01 Front window winder not working

With the ignition key in the ON position, when the buttons on the doors are operated, the electric front windows do not work at all

StepTest procedureResultAction
0PRELIMINARY CHECKS

Check that there are no obstacles preventing the travel of the window

Operating the switches, check that the electric windows fail to work in all conditions (manual and/or automatic operation)

OK

Move onto step 1

There are obstacles
  • Remove the obstacle and check correct operation

End of diagnosis

The electric windows are not working
  • Check the condition of the fuse in the engine compartment fuse unit and ignition-dependent supply fuses (located in the unit under the dashboard) of the driver's door node: Wiring diagram E3050 FRONT WINDOW MECHANISM

End of diagnosis

1CHECK ON CONTROL UNIT SUPPLY (Driver's Door Node)

With diagnostic equipment (Examiner) - CAN line - check whether there are errors in the control unit

OK

Move onto step 2

It is not possible to dialogue with the control unit

End of diagnosis

Right and left motor line found to have short circuit/broken circuit

End of diagnosis

2CHECK MOTOR OPERATION

Disconnect the motor wiring and check operation with direct supply

OK

Move onto step 3

Motors do not work

End of diagnosis

3CONTROL UNIT CHECK

Check correct operation of control unit

OK

Move onto step 4

Fault persists

End of diagnosis

4CHECK ON CORRECT OPERATION

Check that the fault is no longer present

OK

Incorrect selection of diagnostic procedure

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.