Removal/refitting
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Electric cooling fan › Removal/refitting
Engine cooling (V6)Removal/refitting · page 1 of 3
The two-speed electric cooling fan increases the radiator heat exchange capability.
A double threshold thermocontact, the first contact of which is set at 92°C and the second, by way of an additional resistance at 97°C, activates the fan at the two different speeds.
REMOVAL/REFITTING
- Place the vehicle on a lift.
- Disconnect the negative cable from the battery.
- Remove the front bumper (see GROUP 75).
- Unscrew the screw securing the relay box to the crossmember and temporarily move the box to one side.
Parts & tools for this job For 1992 Alfa Romeo 155
- PARTEngine gasket setSearch: Alfa Romeo 155 1992 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.