Sliding roof blind - r+r
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Sun roof/glass panel › Sliding roof blind - r+r
Body fittingsSliding roof blind - r+r
SLIDING ROOF BLIND - R+R
Removing
Op. 7030B18 SLIDING ROOF GLASS PANEL - R+R
1. Disconnect the rods on both sides.
2. Move the drainage channel backwards.
3. Using the special tool, gently press the blind pads inwards and release them from the guide.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1823014000 | Knife | Retainer removal |
4. Extract the blind releasing the pads on the opposite side.
Refitting
- Check that the blind is not damaged.
- Place the blind pads on one side in position then, using the special tool, press the pads on the other side gently inwards and fit them in position.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1823014000 | Knife | Retainer removal |
- Move the drainage channel forwards and connect the rods.
Op. 7030B18 SLIDING ROOF GLASS PANEL - R+R
- Check that the blind and the sun roof are working properly.
Parts & tools for this job For 2005 Alfa Romeo 159
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Alfa Romeo touch up paint
- PARTPanel clip assortmentSearch: Alfa Romeo panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.