FUEL VAPOUR RECOVERY PIPE - R.R.

Operation 1056F73 · PETROL DIRECT INJECTION SYSTEM

3.2 JTS

Removing

1. Loosen the band (1a) and disconnect the fuel vapour recovery pipe (1b), pressure pump side.

2. Disconnect the rapid connector (2a) for the fuel vapour recovery pipe (2b), three-way connector side.

3. Loosen the band and disconnect the fuel vapour recovery pipe, solenoid valve side.

- Remove the fuel vapour recovery pipe.

Refitting

- Place the fuel vapour recovery pipe in position.

- Connect the fuel vapour recovery pipe, solenoid valve side and secure it using the band.

- Connect the rapid connector for the fuel vapour recovery pipe, three-way connector side.

- Connect the fuel vapour recovery pipe, pressure pump side and secure it using the band.