Switch on clutch pedal r r (petrol engines)
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Petrol injection system › Switch on clutch pedal r r (petrol engines)
‹ Prev Single fuel manifold pipes high pressure pipe - r.r.Next › Control unit single of injection ignition system r r
EngineSwitch on clutch pedal r r (petrol engines)
SWITCH ON CLUTCH PEDAL R R (PETROL ENGINES)
Removing
1. Disconnect the electrical connection.
| Description | Component |
|---|---|
| CLUTCH PEDAL SWITCH | See I031 CLUTCH PEDAL SWITCH |
- Rotate the switch on the clutch pedal (2a) through about 90° in an anti-clockwise and extract it from the mounting (2b).
Refitting
- Check that the switch is not damaged.
- Gently lower the clutch pedal and fit the switch in place, then rotate it through about 90° in a clockwise direction until it is locked.
- Connect the electrical connection.
‹ Prev Single fuel manifold pipes high pressure pipe - r.r.Next › Control unit single of injection ignition system r r
Parts & tools for this job For 2005 Alfa Romeo Brera
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.