CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R

Operation 1820B58 · HYDRAULIC CLUTCH SYSTEM

3.2 V6

Removing

Proceed with removal

Op. 5530B10 BATTERY - R+R

Proceed with removal

Remove the protective cap on the master cylinder bleed valve.

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.

Operate the clutch pedal until the brake/clutch reservoir is completely empty.

1. Remove the split pin (1a) and disconnect the pipe between the vibration damper and the operating cyliner (1b), vibration damper side.

2. Remove the split pin (2a) and disconnect the clutch hydraulic circuit vibration damper (2b), clutch master cylinder side.

3. Remove the clutch hydraulic circuit vibration damper (3a) with the pipes incorporated, after having released it from the band (3b).

Refitting

Place the hydraulic clutch circuit vibration damper back in its housing and secure it using the band.

Connect the clutch hydraulic circuit vibration damper, clutch master cylinder side and secure it using the split pin.

Connect the pipe from the vibration damper to the operating cylinder, vibration damper side and secure it using the split pin.

Bleed the air and top up the level in the hydraulic clutch system

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR.

Bleed the air from the hydraulic braking system

Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.

Proceed with refitting

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..

Proceed with refitting

Op. 5530B10 BATTERY - R+R.

1.9 JTD 16V

Removing

Proceed with removal

- 1016A10 sound-proofing cover - r + r

Proceed with removal

Proceed with removal

Op. 5530B10 BATTERY - R+R

Remove the protective cap on the master cylinder bleed valve.

Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

Loosen the bleed valve.

Operate the clutch pedal until the brake/clutch reservoir is completely empty.

1. Remove the split pin (1a) and disconnect the pipe between the vibration damper and the operating cyliner (1b), vibration damper side.

2. Remove the split pin (2a) and disconnect the clutch hydraulic circuit vibration damper (2b), clutch master cylinder side.

3. Remove the clutch hydraulic circuit vibration damper (3a) with the pipes incorporated, after having released it from the band (3b).

Refitting

Place the hydraulic clutch circuit vibration damper back in its housing and secure it using the band.

Connect the clutch hydraulic circuit vibration damper, clutch master cylinder side and secure it using the split pin.

Connect the pipe from the vibration damper to the operating cylinder, vibration damper side and secure it using the split pin.

Proceed with the refitting

Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Proceed with refitting

Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR.

Proceed with refitting

Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.

Proceed with refitting

Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..

Proceed with refitting

Op. 5530B10 BATTERY - R+R.

Proceed with refitting

- 1016A10 sound-proofing cover - r + r