Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)22 · Fault diagnosis
22 · Diagnostics

Manual-automatic shift

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Gear shift › Manual-automatic shift
Fault diagnosisManual-automatic shift

MANUAL-AUTOMATIC SHIFT

1.8 T.SPARK, 2.0 JTS

The vehicle switches to automatic by itself when driving in manual

It should be remembered that, keeping the lever in a position other than the rest position (e.g. if the driver is in the habit of keeping their hand on the lever), will result in switching from manual to City after 12 secconds

Results of the tests
0CONTROL UNIT ERRORS CHECKAll OKProblems metOperation

Check that there are no control unit errors. In particular:

  • Lever switches error 0/1/2/3
Continue to Step 2Presence of error indicatedContinue to Step 1
1CHECKS ON FAULTS DETECTEDAll OKProblems metOperation

Check the faults following the See Test

See Test 2127I What to do for error in Selespeed control unit

End of diagnosisThe state displayed is not correctCheck the connections, continuity of the wiring and the gear lever
2CHECK ON THE CORRECT OPERATIONO F THE LEVER AND CITY BUTTONAll OKProblems metOperation

Check that the lever and the City button are working properly following See Test

See Test 2127H CHECK ON AUTO BUTTON AUTOMATIC OPERATION SELECTION

and See Test

See Test 2127L GEAR LEVER CHECK

Continue to Step 3The lever states displayed are not correctCheck the wiring and the switches/gear lever Repair/replace the part that is not working
There is no change of state and/or the ''CITY'' button is not displayedCheck the switch and the wiring Repair/replace the part that is not working
3AFTER THE CHECK ON THE CORRECT OPERATION OF THE GEAR LEVERAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persistsContact Technical Service for further information on the problem

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.